20 | English
General features

Theft Deterrent Faceplate

The faceplate of the unit can be detached and
taken with you, helping to deter theft.

Removing the Faceplate

1 Turn the ignition OFF or press the [SRC]
button for at least 1 second.
The power turns OFF and the faceplate slides
open.
2 Holding the center part of the faceplate pull
it out.
When the faceplate is kept remove open, according
to the <OFF Wait Time Setting> (page 31) setting, the
faceplate is hidden and the power turns OFF.
The faceplate is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the faceplate in its special storage case while
detached.
Do not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.

Reattaching the Faceplate

1 Set the left side of the faceplate in the
faceplate bracket.
2 Press the right side of the faceplate until it
locks.
Use the enclosed or dedicated faceplate. Using a
faceplate other than the specified one may cause your
unit to malfunction.

TEL Mute

The audio system automatically mutes when a
call comes in.

When a call comes in

"CALL" is displayed.
The audio system pauses.

Listening to the audio during a call

Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.

When the call ends

Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.