42 | English
Installation
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main
unit so that it does not fall off, screw in the
provided screws in the holes shown below.
1 Refer to the function <Theft Deterrent
Faceplate> (page 20) and remove the faceplate.
2 Insert the provided screw into the hole at the
center of the bottom side of the faceplate which
you have removed from the unit.
Accessory5
3 Refer to the section <Theft Deterrent Faceplate>
(page 20) and then reattaching the faceplate.
• Never insert the screw in any other screw hole than the
one specified. If you screw them in another hole, it will
contact and may cause damage to the mechanical parts
inside the unit.