English | 41

Installation

Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (for example, the
sound may skip).

non-Japanese cars Japanese cars

Damage to the unit will result from using screws other
than those provided.
A pair of J-Car Brackets (Accessory 6) are not used when
fitting in a Toyota car.
To attach this unit, make sure the front of the control
panel faces you and fit it into the mounting sleeve by
pressing the four corners of the hard rubber frame at the
same time.
Do not apply strong pressure to other sections than the
corners; otherwise troubles such as the impossibility of
opening or closing the panel may result.
8mm
5mm 5mm
8mm
Accessory3...for Nissan car
Accessory4...for Toyota car
34
Firewall or metal support
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Metal mounting strap
(commercially available)
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
R
L
Accessory6
(follow indications for L/R)
Factory-installed
Radio Bracket
Factory-installed
Radio Bracket
Accessory7
(place thick part on bottom)
Factory trim bezel