English 17
6 Press the volume k nob to set up the
Bluetooth device.
■■“✱H✱A (device name)”: The selected
Bluetooth device is busy.
■■“-H-A (device name)”: The selec ted
Bluetooth device is on standby.
■■“(blank) (device name)“: The Bluetooth
device is deselected.
■■If two cell-ph ones or an audio player
have already been selected, deselect one
device before selecting a new Bluetooth
device.
•“H ”(HFP)or“A”(A2DP)indicatesthe
correspondingprofile.
7 Press to exit pairing mode.
Deleting the registered Bluetooth de vice
2 “(device name)” or “DEV ICE FULL” is
displayed.
3 Turn the volume knob to se lect a
Bluetooth device name.
4 Press and hold th e volume knob to delete
the selected cell-phone.
“DELETE” is displayed.
5 Turn the volume knob to se lect “YES”,
then press to confirm.
“COMPLETED” is displayed.
6 Press to exit easy pairing mode.

Registering from Bluetooth devices

(Pairing)

1 Press SRC to turn on the power.
2 Start reg istering this unit by operating
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select “KENWOOD BT CD/R-5T1” from the
list of found units.
3 Input the PIN cod e (“0000”) in the
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
“0000” as the default. You can change this
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 23).
4 By operati ng the Bluetooth device, start
hands-free connection.
■■If there are 5 or more Bluetoot h devices
registered, you cannot register a new
Bluetooth device.
About the Cell-Phone
■■Version: Bluetooth Standard Ver. 2.1+EDR
■■Profile:
HFP (Hands Free Profile)
SPP (Serial Port Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control
Profile)
For the cell-phones verified for compatibility,
access the following URL:
www.kenwood.com/cs/ce/bt/
■■The units supp orting the Bluetooth
function have been certified for conformity
with the Bluetooth Standard following the
procedure prescribed by Bluetooth SIG.
However, it may be impossible for such
units to communicate with your cell-
phone depending on its type.
B64-4919-00_02_K.indb 17 11/12/21 9:33