22 English
Bluetooth Setup

Selecting the Bluetooth Device

1 Press to enter Bluetooth mode.
2 Turn the volume knob to se lect
[SETTINGS], then press to enter.
3 Turn the volume knob to se lect
[PAIRING], then press to enter.
4 Turn the volume knob to se lect [PHONE
SELECT] or [AUDIO SEL ECT] , then press
to enter.
5 Turn the volume knob to se lect a
Bluetooth device name.
6 Press the volume k nob to set up the
Bluetooth device.
■■“✱ (device name)”: The selected
Bluetooth device is busy.
■■“- (device name)”: The selected Blueto oth
device is on standby.
■■“(blank) (device name)“: The Bluetooth
device is deselected.
■■If two cell-ph ones or an audio player
have already been selected, deselect one
device before selecting a new Bluetooth
device.
7 Hold to finish the pro cedure.
■■To cancel the Bluetooth mode, press .

Bluetooth Device Registration Test

You can check whether your Bluetooth device
can be registered using this unit.
1 Press and hold to enter pairing mode
“PAIRING” is displayed.
2 “PLEASE PAIR YOUR PHONE” is displaye d.
■■When “(device name)” is displayed, selec t
"[PAIRING]" and press the control knob.
■■When “DEV ICE FULL” is displayed, delete a
Bluetooth device and retry.
1. Turn the volume knob to select the
Bluetooth device, then press and hold
to confirm.
2. Turn the volume knob to select “Y ES”,
then press to confirm.
3 Start reg istering this unit by operating
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select “KENWOOD BT CD/R-5T1” from the
list of found units.
4 Input the PIN cod e (“0000”) in the
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
“0000” as the default. You can change this
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 23).
5 “(device name)” is displayed. Press an d
hold the volume knob.
“BT TEST” is displayed.
6 The connec tion result, “OK” or “NG”, is
displayed.
■■“PAIRING”: Registration to this unit
■■“HF CNT”: Hands- free phoning
■■“AUD CNT”: Audio playback
■■“PB DL”: Phone Book downloading
7 Press to exit pairing mode.
■■Data (Phone Book , etc.) of the cell-phone
checked for connection does not remain in
this unit.

Bluetooth Setup

1 Press to enter Bluetooth mode.
2 Turn the volume knob to se lect
[SETTINGS], then press to enter.
3 Turn the volume knob to ma ke a
selection, then press to confirm.
■■See table be low for selection.
■■Repeat step 3 until the desire d item is
selected/activated.
■■Press to return to the previous item.
4 Hold to finish the pro cedure.
■■To cancel the Bluetooth mode, press .
B64-4919-00_02_K.indb 22 11/12/21 9:33