Kenwood KDC-X759 Connecting Wires to Terminals

ANT CONT
ILLUMI
EXT.
CONT
P.CONT
+
+
+
+
FRONT L
FRONT R
REAR L
REAR R
–
+
REAR
NON
FADING FRONT
FM/AM antenna input 15
Rear left output (White)10
Rear right output (Red)11
Fuse (10A) 27
Wiring harness
(Accessory1)22
28
White/Black
31
Gray/Black
34
Green/Black
37
Purple/Black
White
30
Gray
33
Green
36
Purple
39
To front left
speaker 29
To front right
speaker 32
To rear right
speaker 38
To rear left
speaker 35
Ignition wire (Red) 46
Battery wire (Yellow)
47
Ground wire (Black) -(To car chassis) 48
Ignition key
switch 41
Car fuse
box
(Main fuse)
42
ACC 44
Car fuse box 45
Battery
43
If no connections are made, do not let the wire come out from the tab. 3
Front left output (White)14
Front right output (Red)13
Non-fading right output
(Red)12
Power control wire (Blue/White)16
Motor antenna control wire (Blue)17
Dimmer control wire (Orange / White)19
4 When using the optional power amplifier,
connect to its power control terminal.
7 To car light control switch
5 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for the
booster amplifier of the film-type antenna.
External amplifier control wire
(Pink / Black) (KDC-X859/X759 only) 20
8 To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
Non-fading left output
(White) 49
To KENWOOD disc changer/
DAB control input/KPA-SD100/
KPA-HD100/KPA-SS100 25
To connect these leads,
refer to the relevant
instruction manuals. 26
Connecting Wires to Terminals
— 39 —
KDC-X859_U.S_r1 01.12.10 9:40 AM Page 39