46 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 47
Contents
Operation for hands-free phoning
Function of KDC-X896, KDC-BT852HD

Speed dialing (Preset dial)

1 Enter the Bluetooth mode
Press the [ ] button.
“BT MODE” is displayed.
2 Select the Preset dial mode
Turn the Control knob to select “Preset Call”,
and then press the Control knob.
3 Select the number you want to recall from the
memory
Turn the Control knob to select a recall number
(“P1” – “P6”), and then press the Control knob.
4 Make a call
Press the [ ] button.
⁄
•You need to register the preset dial number. Refer to
<Registering in the preset dial number list> (page 46).

Registering in the preset dial number

list

1 Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the phone book
2 Enter the Preset memory mode
Press the [PRESET] button.
3 Select a number and store it in the memory
Turn the Control knob to select memory
number (“P1” – “P6”), and then press and hold
the Control knob.
Canceling the Preset memory mode
Press the [ ] button.

During a call

Disconnecting a call

Press the [SRC] button.

Switching to the Private mode

Push the Control knob rightward or leftward.
Pressing this knob each time switches between the
private talk mode (“PRIVATE”) and hands-free talk
mode.
⁄
•Depending on the t ype of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.

Adjusting the voice volume during a call

Turn the Control knob.

Call waiting

Answering another incoming call with the

current call suspended

Press the [ ] button.

Answering another incoming call after

terminating the current call

Press the [SRC] button.

Continuing the current call

1 Press the Control knob.
2 Turn the Control knob to select “Reject”, and
then press the Control knob.

Answering the waiting call after terminating

the current call

Press the [ ] button.

Switching between the current call and waiting

call

Press the Control knob.
Pressing this knob each time switches between the
calling parties.