4 | Quick Start Guide
First step
Exiting the Demonstration mode
Turn off the Demonstration mode when
you use the unit for the first time after
installation.
1 Press the [ VOL] knob to quit the
Demonstration mode when the message
“To Cancel Demo Press the volume knob”
is displayed (approx. 15 seconds).
2 Turn the [ VOL] knob to select “YES”, and
then press the [VOL] knob.
The Demonstration mode can also be
canceled in the Menu List mode.
Refer to <Demonstration mode Setting>
(page 43) in Instruction manual.
Adjusting the Clock
1 Press the [MENU] button to enter the
Menu List mode.
2 The item can be selec ted and
determined as follows.
”Settings” ➜ “Clock & Date” ➜ “Clock
Adjust”
To select the item, turn the [VOL] knob.
To determine the item, press the [VOL]
knob.
3 Turn the [ VOL] knob to select hour or
minute, and then press the [VOL] knob.
4 Turn the [ VOL] knob to adjust the hour
and minute.
To determine the item, press the [VOL]
knob.
5 Press the [MENU] button to finish the
clock adjusting.
6 Turn the [ VOL] knob to select “Date
Adjust”, and then press the [VOL] knob.
7 Turn the [ VOL] knob to select month,
date, or year, and then press the [VOL]
knob.
8 Turn the [ VOL] knob to adjust the
month, date, and year.
To determine the item, press the [VOL]
knob.
9 Press the [MENU] button to finish the
date adjusting.
10 Turn the [VOL] knob to select “Date
Mode select”, and then press the [VOL]
knob.
11 Turn the [VOL] knob to select Date
format, and then press the [VOL] knob.
12 Press the [MENU] knob for at least 1
second, and then press it again briefly to
exit the Menu List mode.
[MENU] [VOL]
B59-2088-00_00_FLIPQSG_K_1EN.indd 4 11/12/28 12:02