Demonstration mode setting
Turning the demonstration mode ON/OFF.
1Select Demonstration mode Select “MENU” > “DEMO Mode”.
For how to select Function Control items, refer to <Function Control> (page 6).
2Set the Demonstration mode
Press the Control knob for at least 2 seconds. Pressing this button for 2 seconds or longer toggles the setting between “ON” and “OFF”.
3Exit Demonstration mode Press the [FNC] button.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
Removing the Faceplate
1Press the Release button. Drop open the faceplate.
2Drawing the faceplate to left side pull it to forward and remove it.
¤
•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
•Keep the faceplate in its faceplate case while detached.
•Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Faceplate
1Align the shaft on the unit with the depression on the faceplate.
2Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
English 23