For operating KCA-BT200 (Optional)

For operation refer to Model-B-2 in the Instruction Manual of KCA-BT200, and the table below.

Notation used in the KCA-BT200

Operation

Instruction Manual

 

 

[38] button

Control knob

 

 

 

Press the [AUTO]/[TI] button.

Press the Control knob for at least

 

1 second.

For operating KCA-BT100 (Optional)

The following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction.

<Dialing by Using the Quick Dialing Function>

1.Press the Control knob. Select the display other than “INITIAL”.

2.Press the [] button.

3.Select the number to recall by turning the Control knob.

4.Press the Control knob.

<Registering to the Preset Dial Number List>

1.Operation is the same. Refer to the instruction manual of KCA-BT100.

2.Press the [] button.

3.Select the number to memory by turning the Control knob.

4.Press the Control knob for at least 1 second.

<Deleting a Registered Cell-Phone>

Refer to <Deleting a Registered Bluetooth device> in this instruction manual.

<Menu System>

For how to operate Menu, refer to <Function Control> in this instruction manual.

About display

Cell-Phone Status is displayed in the status display of this unit.

Moreover, some displays are different from the description of KCA-BT100 Instruction Manual.

Displays of KCA-BT100 Instruction

 

Actual displays on this unit

Manual

 

 

“DISCONCT”

 

“HF Disconnect”

“CONNECT”

 

“HF Connect”

“PHN-DEL”

 

“Device Delete”

“P-STATUS”

 

“Phone Status”

About the Cell-Phone

This unit conforms to the following Bluetooth specifications:

Version

Bluetooth Standard Ver. 1.2

Profile

HFP (Hands Free Profile)

 

OPP (Object Push Profile)

 

PBAP (Phonebook Access Profile)

 

SYNC (Synchronization Profile)

For the cell-phones verified for compatibility, access the following URL:

http://www.kenwood.com/bt/information/

⁄

•The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth

SIG. However, it may be impossible for such units to communicate with your cell-phone depending on its type.

•HFP is a profile used to make a hands-free call.

•OPP is a profile used to transfer data such as a phone book between units.

About the Bluetooth Audio player

This unit conforms to the following Bluetooth specifications:

Version

Bluetooth Standard Ver. 1.2

Profile

A2DP (Advanced Audio Distribution Profile)

 

AVRCP (Audio/Video Remote Control Profile)

⁄

•A2DP is a profile designed to transfer the music from an audio player.

•AVRCP is a profile designed to control playback and selection of music by an audio player.

About KENWOOD “Music Editor” of PC application

•“Music Editor” is recorded in the CD-ROM attached to this unit.

•Refer to the user’s manual recorded in the installation CD-ROM and Help of “Music Editor” for the operation method of “Music Editor”.

•The unit can play USB device created by “Music Editor”.

•Information about “Music Editor” upgrade is put on the site, www.kenwood.com.

English 41