: Signal strength of cell-phone.

Maximum Minimum

⁄

•Icons are not displayed if information cannot be obtained from the cell-phone.

•Since the number of steps of the control unit is different from that of the cell-phone, the statuses displayed on the control unit may discord from those displayed on the cell-phone.

•HIGHWAY-SOUND

Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additionally, it accentuates bass sound being lost by road noises to make the bass sound more dynamic.

•Illumi DIM (Key illumination dimmer) Reduces the key Illumination brightness.

AUTO: Dims the illumination in conjunction with the Light switch of the vehicle.

MNAL1: Dims the illumination constantly.

MNAL2: Dims the illumination darker than MNA1.

OFF: Does not dim the illumination.

•Language (Language setting)

When the language is selected, the following character strings are displayed in the selected language:

Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT200/BT100 (optional accessory)

•Mic Gain

Adjusts the sensitivity of the built-in microphone for a telephone call. Adjust the voice of caller. Setting to “+” increases the voice volume.

•NR Level

Reduces the noises generated by surrounding environment without changing the built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to “+” increases the noise reduction.

•SP Select (Setting up the Voice Output Speakers)

You can specify the voice output speakers. “FRONT” : Outputs voice from the front-left and

front-right speakers.

“F-R” : Outputs voice from the front-right speaker.

“F-L” : Outputs voice from the front-left speaker.

⁄

•Select the speaker which is further from the microphone in order to prevent howling or echoes.

•SRC Select

Setting up the Source Select mode.

1 : Displays source icons for your choice.

2 : Allows you to select sources one after another.

•Supreme+ (Supreme Plus)

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding.

The bass and vocal sound that are cut off by encoding are supplemented for the reproduction of natural sound quality.

Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.

The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

The bass and vocal sound of Music CD and iPod is also supplemented.

•Zone2 (Dual Zone)

Set the destination (front speaker “Front” or rear speaker “Rear”) of the sub source (AUX IN) when the Dual Zone function is turned on.

The marking of products using lasers (Except for some areas)

CLASS 1

LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

•The “AAC” logo is trademark of Dolby Laboratories.

•The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.

•iTunes is a trademark of Apple Inc.

•iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

•iPhone is a trademark of Apple Inc.

•“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

•“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.

•Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

English 43