Kenwood KDV-MP7339, KDV-MP7439 Disc Setup 2*5, Tuner, Stereo, Down Mix, Menu items, (Compression), IF Band Width, D. Audio Output, Selectable settings, [reference page]

Disc Setup 2*5

Menu items

D. Audio OutputDown Mix

Selectable settings, [reference page]

Select the signal format emitted through the DIGITAL OUT (optical) terminals. (☞also page 38)

PCM Only : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, or MPEG Audio, or connecting to a recording device.

Dolby Digital : Select this when connecting an amplifier or a decoder compatible with Dolby Digital.

Stream : Select this when connecting an amplifier or a decoder compatible with Dolby Digital, DTS, or MPEG Audio.

When playing back a multi-channel disc, this setting affects the signals reproduced through the LINE OUT plugs.

Dolby Surround : Select this to enjoy multi-channel surround audio by connecting an amplifier compatible with Dolby Surround.

Stereo : Normally select this.

Tuner

D. (Dynamic) Range Compres.	You can enjoy a powerful sound at a low volume level while playing
(Compression)	Dolby Digital software.
	Auto : Select to apply the effect to multi-channel encoded software.
	On : Select this to always use this function.
IF Band Width	Auto : Increases the tuner selectivity to reduce interference noises
	between adjacent stations. (Stereo effect may be lost.)
	Wide : Subject to the interference from adjacent stations, but sound
	quality will not be degraded and the stereo effect will remain.

*5 Selectable only for “DISC” (disc playback pauses).

Continued on the next page

English 31