Equalizer

Menu items

Selectable settings, [reference page]

Flat/Hard Rock/R&B/Pop/Jazz/

[25]

Dance/Country/Reggae/Classic/

 

User1/User2/User3

 

 

 

Sound

Menu items

 

 

Selectable settings, [reference page]

Fader/Balance

 

 

Adjust fader—speaker output balance between the front and rear

Adjusts fader

 

 

speakers.

 

 

 

 

 

Upmost—front only

 

 

 

 

Downmost—rear only

 

 

 

 

When using a two-speaker system, set the fader to the center (00).

 

 

 

 

Adjust balance—speaker output balance between the left and right

Adjust balance

 

 

 

speakers.

 

 

 

 

 

 

 

Leftmost—left only

 

 

 

 

Rightmost—right only

 

 

 

 

 

 

 

 

 

Volume Adjust

 

 

Adjust and store auto-adjustment volume level for each source,

 

 

 

 

comparing to the FM volume level. The volume level will automatically

 

 

 

 

increase or decrease when you change the source.

 

 

 

 

–12to +12; Initial 00

 

 

 

 

 

Subwoofer

 

 

Adjust the settings below in the submenu:

 

 

 

 

Phase : Subwoofer phase. Select either <Normal> or <Reverse>,

 

 

 

 

 

which reproduces a better sound.

 

 

 

 

Level: Subwoofer output level. Level: –06to +08; Initial 00

 

 

 

 

 

High Pass Filter

 

 

Through : Select when the subwoofer is not connected.

 

 

 

 

On : Select when the subwoofer is connected.

 

 

 

 

 

Crossover

 

 

Adjust the crossover frequency between the front/rear speakers and the

 

 

 

 

subwoofer.

 

 

 

 

80Hz, 120Hz, 150Hz

 

 

 

 

 

Amplifier Gain

 

 

You can change the maximum volume level of this unit.

 

 

 

 

Off : Deactivates the built-in amplifier.

 

 

 

 

Low Power : VOL 00 to 30 (Select this if the maximum power of the

speakers is less than 50 W) High Power : VOL 00 to 50

English 33