— 4 —
English
•If you experience problems during
installation, consult your Kenwood dealer.
•If the unit fails to operate properly, press
the Reset button. The unit returns to
factory settings when the Reset button is
pressed. If the unit still fails to operate
properly after the Reset button has been
pressed, contact your local KENWOOD
dealer for assistance.
•Press the reset button if the CD auto
changer is first controlled and operates
incorrectly. The original operating condition
will return.
•We strongly recommend the use of the
Code Security function (page 54) to prevent
theft.

NOTE

Safety precautions

Reset button

To prevent damage to the machine,

take the following precautions:

•Make sure to ground the unit to a negative
12V DC power supply.
•Do not open the top or bottom covers of
the unit.
•Do not install the unit in a spot exposed to
direct sunlight or excessive heat or
humidity. Also avoid places with too much
dust or the possibility of water splashing.
•Do not subject the faceplate to excessive
shock, as it is a piece of precision
equipment.
•When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse
with the wrong rating may cause your unit
to malfunction.
•To prevent short circuits when replacing a
fuse, first disconnect the wiring harness.
•Do not place any object between the
faceplate and the unit.
•During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
•Do not apply excessive force to the open
faceplate or place objects on it. Doing so
will cause damage or breakdown.

2CAUTION IMPORTANT INFORMATION

About the disc changer to be

connected:

To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to
"N".
When you connect a model with no "O-N"
switch, the converter cord CA-DS100
available as an option may be required. For
details, consult your Kenwood dealer.
If a model with no "O-N" switch is
connected, some unavailable functions and
information that cannot be displayed are
generated, such as the DNPS, Magazine
random play, and CD Text display.
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.

You can damage both your unit and

the CD changer if you connect them

incorrectly.

Do Not Load 8-cm (3-in.) CDs in the

CD slot

If you try to load an 8-cm CD with its adapter
into the unit, the adapter might separate
from the CD and damage the unit.

2CAUTION