Pioneer AVH-P6400 Tuner, Introduction of advanced tuner operation, Storing broadcast frequencies

Section

05Tuner

Introduction of advanced tuner operation

1

1FUNCTION display

Shows the function status.

1Press A.MENU when TUNER source indica- tions are displayed.

MENU is displayed.

2Select TUNER and press A.MENU.

TUNER MENU indications are displayed as follows:

BSM (best stations memory) LOCAL (local seek tuning)

P.CH MEMORY (preset channel memory)

•Select BACK in the MENU display or press BACK to return to the previous display. Pressing WIDE on the main unit returns you to the previous display.

•To return to the frequency display, press both

BAND/ESC and DISP.

Note

•If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing broadcast frequencies

You can easily store up to six broadcast frequen- cies for later recall with 5or ∞.

1Press 5or ∞to select P.CH MEMORY from the TUNER MENU, and press A.MENU.

P.CH MEMORY adjustment indications are dis- played.

2Adjust frequency with 2or 3.

If you continue pressing 2or 3, a strong broad- cast frequency is automatically searched for, and search ends when it is found.

3Select a preset channel number with 5or ∞and press A.MENU to preset that frequency.

4If you want to preset frequencies one after another, use 5or ∞to move to the next preset channel you want to use to store a frequency, and perform the same operation.

When you have finished, press BAND/ESC to return to the source display.

The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory.

You can use 5and ∞to recall radio station frequencies assigned to P1-6(P.CH MEMORY).

22En