Pioneer AVH-P6400CD Other Functions, Setting remote control code type, Using the AUX source

Other Functions

Setting remote control code type

When the remote control operation switch is set to DVD, changing the remote control code type enable to operate the Pioneer DVD player by the supplied remote control. There are two remote codes, code type A and code type B.

When using this unit with an “XDV-P9” Multi- DVD Player, select code A.

When using this unit with “SDV-P7” DVD player, select code A or B (depending on reception signal setting of DVD player).

Set the remote control selection switch on the left side of the remote control to appropriate position with a pen tip or other pointed instru- ment .

•If you selected B mode, read the following procedure and change the code type into the appropriate one.

Using different entertainment audio displays

You can enjoy displays while listening to each sound source. The display for this MENU is the same regardless of which source you operate from.

Press NAVI/AV on the head unit.

Each time you press NAVI/AV on the head unit the display changes in the following order:

MOVIE SCREEN—PICTURE 1—PICTURE 2

Section

13

Using the AUX source

An IP-BUS-RCA Interconnector such as the	English
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner’s manual.
Selecting AUX as the source	Español
Press SOURCE to select AUX as the source.
Press SOURCE until AUX appears in the display.
• If the auxiliary setting is not switched on, AUX
cannot be selected. For more details, see
Switching the auxiliary setting on page 59.	Deutsch
Setting the AUX title
The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the source,	Français
press A.MENU and the AUX SOURCE MENU is
displayed.
2 Press 5or ∞to select AUX, and press
A.MENU.
AUX MENU is displayed.	Italiano
NAME EDIT adjustment indications are dis-
3 Press 5or ∞to select NAME EDIT, and
press A.MENU.
played.
4 Press A.MENU to select the desired charac-
ter type.	Nederlands
Press A.MENU repeatedly to switch between the
following character type:
Alphabet (Upper case), Numbers and Symbols—
Alphabet (Lower case)

En 61