Pioneer AVH-P6400 Multi-CD Player, Pausing CD playback, Using compression and bass emphasis

Section

07Multi-CD Player

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1Press 5or ∞to select PAUSE from the M-

CD MENU, and press A.MENU.

PAUSE ON/OFF indications are displayed.

2Press 5to turn pause on.

Pause :ON appears in the display. Play of the current track pauses.

3 Press ∞to turn pause off.

Pause :OFF appears in the display. Play will resume at the same point that you turned pause on.

Using compression and bass emphasis

You can use these functions only with a multi-CD player that supports them.

Using COMP (compression) and DBE (dynamic bass emphasis) functions let you adjust the sound playback quality of the multi-CD player. Each of the functions have a two-step adjust- ment. The COMP function balances the output of louder and softer sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to.

1Press 5or ∞to select COMP from the M-

CD MENU, and press A.MENU.

COMP adjustment indications are displayed.

• If the multi-CD player does not support COMP/DBE, NO COMP is displayed when you attempt to select it.

2Press 5or ∞to select your favorite setting. Press 5or ∞repeatedly to switch between the following settings:

COMP OFF—COMP 1—COMP 2—COMP OFF— DBE 1—DBE 2

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi- CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections.

Creating a playlist with ITS program- ming

You can use ITS to enter and playback up to 99 tracks per disc, up to 100 discs (with the disc title). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

When using a multi-CD player that does not feature an ITS function, you cannot select ITS PLAY.

1Play a CD that you want to program. Press 5or ∞to select a CD.

2Press 5or ∞to select ITS MEMORY from the M-CD MENU, and press A.MENU.

ITS MEMORY adjustment indications are dis- played.

3Select a desired track by pressing 2or 3.

4Press 5to store the currently playing track in the ITS MEMORY.

MEMORY is displayed briefly and the currently playing selection is added to your playlist. The display then shows ITS again.

32En