Pioneer AVH-P6400CD Other Functions, Setting the automatic open, mode, Italiano, Nederlands

Other Functions

•When using a DVD player unit connected with an RCA cable, if you do not select M-DVD, there will be no picture even if you switch sources.

•When using a DVD player unit connected with an AV-BUS cable, do not select M-DVD. If you do, there will be no picture.

•If you select BACK UP CAMERA, press ∞to move to BACK UP POLARITY, or use 2or 3to select BATTERY and GND.

BATTERY: When the gear shift is moved to the REVERSE (R) position, and the polarity of the connected lead wire is positive.

GND: When the gear shift is moved to the REVERSE (R) position, and the polarity of the connected lead wire (refer to page 30) is nega- tive.

•This product features a function that automat- ically switches to the video input into the video or back camera jack when a back-up camera is installed on your car. If this is the case, when the gear shift is in the REVERSE (R) position, the video automatically switches to video or back camera. (The default setting is BATTERY. For more details, consult with your dealer.)

Notes

•If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

•If you select BACKUP CAMERA, switching to the correct video setting may not occur. Confirm that directly after changing the set- ting, it changes to VIDEO when the gear shift is moved to REVERSE from another position.

•If you select BACKUP CAMERA, the display changes to VIDEO during normal drivings, reverse the settings.

Section

13

Setting the automatic open
mode	English
To prevent the display from hitting the shift lever
of an automatic vehicle when it is in the “P”
(park) position, or when you do not wish open-
ing/closing of the display to be carried out auto-
matically, you can switch this function ON/OFF.
1 Press 5or ∞to select AUTO FLAP from the	Español
SET UP MENU, and press A.MENU.
AUTO FLAP adjustment indications are dis-
played.
2 Press 2to select the manual.
Press 2until the OPEN/CLOSE:MANUAL	Deutsch
setting appears in the display. Each time you
press a manually set monitor’s EJECT, the moni-
tor opens or closes.

3 Press 3to select the auto.

Press 2until the OPEN/CLOSE:AUTO setting
appears in the display. With auto setting, the	Français
monitor automatically opens or closes when
power to this unit is switched ON.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.	Italiano

Nederlands

En 63