Pioneer AVH-P6400 Audio Adjustments, Using the high pass filter, Adjusting source levels

Models: AVH-P6400CD

1 212
Download 212 pages 24.47 Kb
Page 58
Image 58
Using the high pass filter

Section

11Audio Adjustments

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, switch the HPF (high pass filter) on. Only frequencies higher than those in the selected range are output from the front and rear speakers.

1Press 5or to select HPF from the AUDIO

MENU, and press A.MENU.

HPF adjustment indications are displayed.

2Press 5to turn high pass filter on. HPF:ON appears in the display. High pass filter is now on.

• To turn high pass filter off, press .

3Press 2or 3to select a high pass filter range.

Press 2and FREQUENCY:50 Hz is displayed. Press 3and 80 Hz, 125 Hz is displayed. Only frequencies higher than those in the selected range are output from the front or rear speak- ers.

1Press 5or ∞to select HPF from the AUDIO Note

If you switch the SFEQ mode, the HPF func- tion is automatically switched off. By switch- ing the HPF function on after selecting the SFEQ mode, you can combine HPF function with SFEQ function. 3Press 2or 3to select a high pass filter range.

Adjusting source levels

SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radi- cal changes in volume when switching between sources.

Settings are based on the volume level of the FM tuner, which remains unchanged.

1Compare the FM tuner volume level with the level of the source you wish to adjust.

2Press 5or to select SLA from the AUDIO

MENU, and press A.MENU.

SLA adjustment indications are displayed.

3Press 5or to adjust the source volume. Each press of 5or increases or decreases the source volume.

LEVEL:+4 LEVEL: –4is displayed as the source volume is increased or decreased.

Adjusting source levels Notes

Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner.

The AM tuner volume level can also be adjusted with source level adjustments.

The built-in CD and the multi-CD players are both set to the same source level adjustment volume automatically when using the AVH- P6400CD.

External unit 1 and External unit 2 are set to the same volume adjustment setting automat- ically. 2Press 5or ∞to select SLA from the AUDIO

58En

Page 58
Image 58
Pioneer AVH-P6400CD operation manual Audio Adjustments, Using the high pass filter, Adjusting source levels