Pioneer AVH-P6400CD Before You Start, Resetting the Microprocessor, Attaching the operation panel

Before You Start

Important

•Do not drive with the operation panel removed and the monitor up as the angle of the display may change resulting in scratching or dam- age.

•Be careful of the magnetic part of this prod- uct. Do not place magnetic products such as credit cards, cassette tapes and watches near it. Doing so may result in damage to those products or the loss of information recorded on them.

Attaching the operation panel

Replace the operation panel by holding it upright to this unit and clipping it securely into the mounting hooks.

Do not use this product when it is just hanging on hooks.

Section

01

Resetting the Microprocessor

When the ignition switch is turned OFF, press-	English
ing RESET lets you reset the microprocessor to
its initial settings without changing SET UP
MENU settings, Condition Memory and other
settings.
Press RESET in the following cases.
• When this unit fails to operate correctly.	Español
• When strange (incorrect) messages appear
on the display.

	Deutsch
1 Turn the ignition switch OFF.
	Français
2 Press RESET.
Use a pen tip or other pointed instrument.
Notes
• When using with a Pioneer Navigation
System, if you press RESET, be sure the ACC	Italiano
OFF is selected. If ACC ON is selected, correct
operation may not be possible even if you
press RESET.
• After completing connections or when you
want to erase all memorized settings or return
the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to	Nederlands
ACC ON before pressing RESET.

En 11