Kenwood KIV-BT900 Display, Remarks, Overview, Make a setting, SRC MENU Volume, 4Make a setting, Bluetooth Setting, Enter Bluetooth mode, Select “BT Settings”

Function of KIV-BT900

KIV-700 with KCA-BT300/BT200 (Optional Accessory)

Bluetooth Setup

SRC MENU Volume

Bluetooth Setting

You can select following Bluetooth Setting items.

1Enter Bluetooth mode

KIV-BT900: Press the [ ] button.

KIV-700: Press the [PLAY MODE] button for at least 1 second.

2Turn the [Volume] knob and press it when the desired item is displayed.Select “BT Settings”.

3Select the setting item to adjust

Turn the [Volume] knob and press it when the desired item is displayed.

Display			Overview
“SMS Inbox”			Display the received short message.
			Refer to <Display the SMS> (page 56).
“BT Settings”
	“Phone Selection”		Select a cell-phone or Bluetooth audio player
	“Audio Selection”*1		connection.
			Refer to <Selecting the Bluetooth Device You
			Wish to Connect> (page 52).
	“SMS Download”		Download a short message.
			Refer to <Downloading the SMS> (page 56).
	“Voice Tag”		Registers voice for voice recognition and voice
			to select the Phone number category in Phone
			book.
			- Adding a Voice Dialing Command (page 54)
			- Setting a Voice Command for Category (page
			55)
	“Detailed Setup”		Move to detailed item.
		“Device	Register a Bluetooth device (pairing).
		Registration”	Refer to <Registering Bluetooth Device>
		“Special Device	(page 51).
		Select”
		“Device Delete”	Cancel registration of the Bluetooth device.
			Refer to <Deleting a Registered Bluetooth
			Device> (page 53).
		“PIN Code Edit”	Specify the PIN code required when registering
			this unit using the Bluetooth device.
			Refer to <Registering PIN Code> (page 52).
		“Auto Answer”	Answer a call automatically after lapse of the
			preset time interval for automatic answer.
			“OFF”/ “0s” – “8s” – “99s”

50KIV-BT900/ KIV-700

“Bluetooth HF”/	You can specify output speakers for hands-free
“Bluetooth HF/	voice communication and Bluetooth audio
Audio”*1	sound.
	“Front”: Outputs voice from the front speakers.
	“All”: Outputs voice from the front and rear
	speakers.
“Call Beep”	You can output a beep from the speaker when
	a call comes in.
	“ON”: Beep is heard.
	“OFF”: Beep is canceled.
“BT F/W Update”	Display the version of the firmware of this unit.
“Mic Gain”*2	Adjust the sensitivity of the microphone for a
	telephone call. Adjust the voice of caller. Setting
	to “+” increases the voice volume.
	“–3” – “0” – “+3”
“Noise	Reduce the noises generated by surrounding
Reduction”*2	environment without changing the microphone
	volume. Adjust the voice of caller when it is
	not clear. Setting to “+” increases the noise
	reduction.
	“–3” – “0” – “+3”
“Echo Cancel	Adjust the level of echo cancellation. Setting to
Level”*2	“+” increases the echo cancel reduction.
	“–2” – “0” – “+2”
	(	: Factory setting)

*1 Function of KIV-700 with KCA-BT300/BT200 (Optional Accessory)

*2 Function of KIV-BT900/ KIV-700 with KCA-BT300 (Optional Accessory)

4Make a setting

Turn the [Volume] knob to select a setting value, and then press the [Volume] knob.

5Exit BT Setting mode

Press the [MENU] button for at least 1 second.

Remarks

•“Auto Answer” ⁜(Setting the Time Interval for Automatic Answer)

This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. “OFF” : Does not answer the phone call automatically.

“0” : Automatically answers the phone call at once.

“1s” – “99s” : Automatically answers the phone call after lapse of 1 – 99 seconds.

⁄

•If the time set in the cell-phone is shorter than that set in the unit, the former will be used.

•This function does not work for call waiting.

•“BT F/W Update” ⁜(Displaying the Firmware Version) Display the version of the firmware of this unit.

For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/bt/