Kenwood KMF-X9000

4 EN

72-Channel stereo configuration

This is the ‘standard’ stereo operation mode, with the amplifier driving 2 speakers in stereo (such as the Surround Back Left and

Surround Back Right speakers in a THX Surround EX® home theater system). The amplifier delivers its rated stereo power output

into each speaker.

1Make sure that the KMF-X9000’s power cord is unplugged from the wall outlet before making any connections.

2According to the speakers to be used, set the speaker impedance selector switch as follows:

•For 2 Ω speakers: Set the 2Ω (STEREO)/6Ω OVER switch to 2Ω (STEREO) and 6Ω OVER/2Ω switch to 2Ω.

•For 6-16 Ω speakers: Set the 2Ω (STEREO)/6Ω OVER switch to 6Ω OVER and 6Ω OVER/2Ω switch to 6Ω OVER.

3Connect the amplifier as shown in the diagram.

CLIP

INDICATOR

CD 2 / TAPE 2

MONITOR

SURROUND

BACK 96kfs

DISCRETE 6.1 MATRIX 6.1 NEO : 6 PRO LOGIC

DTS-ES

* If you connect more than one pair of speakers to the KMF-X9000, move the 2Ω (STEREO)/6Ω OVER (THX) switch to the 2Ω

(STEREO) position. The amplifier’s performance is not THX®-certified when the switch is set in the 2Ω (STEREO) position.

Now you can plug the power cord of this unit into the AC outlet!

CAUTION:

Before reconnecting a speaker cord or switching a selector switch, turn OFF the power and unplug the power

cord to avoid malfunctions or damage to the unit.

Preamplifier

Audio cord (supplied)

To wall AC outlet

Speakers

(2Ω-16Ω)

* In the case of 2 ΩON : +12 V

OFF : OPEN (or GND)

GND

KRF-X9995D

For RELAY CONTROL connec-

tion to KRF-X9995D or other

compatible unit, see page 6.

Left

(L SURROUND

BACK)

Right

(R SURROUND

BACK)

In the case of 6 Ω

Stereo mini-plug cord (supplied)

For 12 V RELAY CONTROL, see page 6.