Remote control (Optional accessory) setup

Remote control ID setup

When connecting the remote control KCA-RC107MR (Optional accessory) to this unit, you should register the ID for KCA-RC107MR.

1Enter Remote control setup mode

Press the [2ZONE] button for at least 1 second.

2Select the Remote control ID setup item Turn the [VOL] knob to select “Remote ID Set”, and then press the [ENTER] button.

Remote control ID list is displayed. “Yes” indicates that this ID is already registered. “No” indicates that this ID is available.

3Enable Remote control ID registration Press the [ENTER] button. “Registering...” is displayed.

4Register Remote control ID

For KCA-RC107MR, press the [ENTER], [SRC], or [DISP] button.

Button

 

Remote control ID

[ENTER]

 

ID1 is registered.

[SRC]

 

ID2 is registered.

[DISP]

 

ID3 is registered.

“ID# Setup Completed” is displayed.

5End Remote control setup mode Press the [2ZONE] button.

Cancelling Remote control ID setup

Press the [2ZONE] button for at least 1 second.

⁄

•When removing KCA-RC107MR, delete the registered remote control ID, as described in <Remote control ID delete> (page 20).

Remote control ID delete

Delete the ID registered for the remote control KCA- RC107MR (optional accessory).

1Enter Remote control setup mode

Press the [2ZONE] button for at least 1 second.

2Select the Remote control ID delete item Turn the [VOL] knob to select “Remote ID Delete”, and then press the [ENTER] button. List of the IDs registered for remote controls is displayed.

3Select the remote control ID to be deleted Turn the [VOL] knob.

4Delete the Remote control ID Press the [ENTER] button. “Remote ID# Delete?” is displayed.

5Turn the [VOL] knob to select “YES”, and then press the [ENTER] button.

“ID# Delete Completed” is displayed.

6End Remote control setup mode Press the [2ZONE] button.

Cancelling Remote control ID delete

Press the [2ZONE] button for at least 1 second.

Dual zone control setup

When the dual zone function is set to ON, select the channel, either front or rear, to be controlled by the remote control KCA-RC107MR (optional accessory).

1Enter Remote control setup mode

Press the [2ZONE] button for at least 1 second.

2 Select the Dual zone control setup item Turn the [VOL] knob to select “Remote Zone Select”, and then press the [ENTER] button.

Current settings are displayed for the registered remote control IDs.

3 Select the target remote control ID Press the [u] or [d] button.

4

Select the target channel

 

Press the [ ] or [ ] button.

 

 

 

 

 

Display

 

Controlled channel during dual zone mode

 

“Front”

 

Front channel is controlled.

 

“Rear”

 

Rear channel is controlled.

5

End Remote control setup mode

 

Press the [2ZONE] button.

20 KMR-700U