Function of
Bluetooth Setup
Registering PIN Code
By operating the Bluetooth device, specify the PIN code necessary for registering this unit.
1Select PIN code edit mode Select “MENU” > “PIN Code Edit”.
For how to select Function Control item, refer to <Function Control> (page 6).
2Enter PIN code edit mode
Press the Control knob for at least 1 second. The current setting of PIN code is displayed.
3Input the PIN code
Operation type |
| Operation |
Select the numbers. |
| Turn the Control knob or push it towards |
|
| up or down. |
Move to the next digit. |
| Push the Control knob towards right. |
Delete the last digit. |
| Push the Control knob towards left. |
4Register a PIN code
Press the Control knob for at least 1 second. If “Completed” is displayed, registration is completed.
5Exit PIN code edit mode Press the [FNC] button.
⁄
•By default, “0000” is specified.
•A PIN code can be specified with up to eight digits.
Downloading the Phone Book
Download the phone book data from the cell- phone so you can access the phone book from this unit.
To download automatically
If the
⁄
•Setting on the
•If no phone book data is found in the unit even after the “Completed” display, your cell phone may not support automatic download of phone book data. In this case try downloading manually.
To download from the
1By operating the
2By operating the
By operating the
•During downloading: “Downloading” is displayed.
•After completion of downloading: “Completed” is displayed.
3By operating the
To clear the downloading completion message Press any button.
⁄
•Up to 1000 phone numbers can be registered for each registered
•Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.)
•To cancel downloading of the phone book data, operate the
24