Satellite Radio tuner (Optional Accessory) control
Basic Operation | ⁄ | |
Selecting Satellite Radio source | • You cannot Channel search until the category | |
information is acquired. | ||
|
Press the [SRC] button.
Select the “SIRIUS”/ “XM” display.
⁄
•You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if “CALL … TO SUBSCRIBE” appears.
•The radio may take a little time to start receiving after you select the Satellite Radio source.
•If the signal reception fails, “Acquiring Aignal”/ “No Signal” appears.
Switching Seek Mode
Select “MENU” > “Seek Mode”.
For how to select Function Control item, refer to <Function Control> (page 6).
Display |
| Operation |
“CH” |
| Normal manual seeking control. |
“PRESET” |
| Search in order of the channels in the Preset memory. |
Select the channel
Push the Control knob towards right or left.
Selecting the Preset Band
Push the Control knob toward up.
Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4.
Category and Channel Search
Selecting the channel and category you want to receive.
1Enter Search mode Turn the Control knob.
2Enter Category and Channel Search mode Turn the Control knob to select “CH Search”, and then press the Control knob.
3Select the Category
Turn the Control knob to select Category, and then press the Control knob.
4Select the Channel
Turn the Control knob to select Channel, and then press the Control knob.
Cancelling Category and Channel Search mode Press the [FNC] button.
28
Preset Memory
Putting the channel in the memory.
1Select the channel to put in the memory Push the Control knob towards right or left.
2Enter Search mode Turn the Control knob.
3Select the number to put in the memory Turn the Control knob.
4Register channel to preset number
Press the Control knob for at least 1 second.
Cancelling the Preset Memory mode Press the [FNC] button.
⁄
•Only the channel number is stored. Category information is not stored.
Preset Tuning
Recalling the channels in the memory.
1Enter Search mode Turn the Control knob.
2Select a desired station in the memory Turn the Control knob.
3Recall the station Push the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
Channel Scan
Every receivable Channel is checked for 10 seconds.
1Start Channel Scan Select “Channel Scan”.
For how to select Function Control items, refer to <Function Control> (page 6).
2Release it when the channel you want to listen to is received
Press the Control knob.