Function of
Bluetooth Setup
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags.
1Select Phonebook name edit mode Select “BT” > “Voice Tag” > “PB Name Edit”. For how to select Function Control item, refer to <Function Control> (page 6).
2Enter Phonebook name edit mode Press the Control knob.
3Search for the name to register
Select the name to register with reference to 4 in <Calling a number in the Phone Book> (page 20). If a voice tag has already been registered for a name, “*” is displayed before the name.
4Select a mode
Turn the Control knob.
Display |
| Operation |
“PB Name Regist” |
| Register a voice tag. |
“PB Name Check”* |
| Play a voice tag. |
“PB Name Delete”* |
| Delete a voice tag. |
“Return” |
| Return to step 2. |
*Displayed only when a name for which a voice tag has been registered is selected.
Select “PB Name Regist” (Regist)
5Register a voice tag (first) Press the Control knob. “Enter Voice 1” is displayed.
When a beep is heard, speak a voice tag within 2 seconds.
6Confirm the voice tag (second) Press the Control knob.
“Enter Voice 2” is displayed.
When a beep is heard, speak the same voice tag that was spoken in step 5 within 2 seconds. “Completed” is displayed.
7End registration
Press the Control knob.
Return to step 2. You can register another voice tag continuously.
⁄
•If your voice cannot be recognized, a message is displayed. Refer to <Troubleshooting Guide> (page 40). Pressing the Control knob allows you to retry voice input.
Select “PB Name Check” (Play)
5Press the Control knob.
Play the registered voice and return to step 2.
26
Select “PB Name Delete” (Delete)
5Delete a voice tag Press the Control knob.
6Turn the Control knob to select “YES”, and then press the Control knob.
“Delete” is displayed.
Exit Phonebook name edit mode
Press the [FNC] button.
⁄
• Audio sound is not output during voice tag registration.
Setting a Voice Command for Category
Add a voice tag to the phone number category (type) for voice calling.
1Select Phone Number type edit mode Select “BT” > “Voice Tag” > “PN Type Edit”. For how to select Function Control item, refer to <Function Control> (page 6).
2Enter Phone Number type edit mode Press the Control knob.
3Select the category (type) you wish to set Turn the Control knob and push the center when the desired category name is displayed. “General”/ “Home”/ “Office”/ “Mobile”/ “Other”
4Select a mode
Turn the Control knob.
Display |
| Operation |
“PN Type Regist” |
| Register a voice tag. |
“PN Type Check” |
| Play a voice tag. |
“PN Type Delete” |
| Delete a voice tag. |
“Return” |
| Return to step 2. |
5Register the category (type) by performing steps 5 to 7 in <Adding a voice dialing command> (page 26).
6Exit Phone Number type edit mode Press the [FNC] button.
⁄
•Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command.