Menu Glossary

•Auto Answer

This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer.

“OFF” : Does not answer the phone call automatically.

“0” : Automatically answers the phone call at once.

“1s” – “99s” : Automatically answers the phone call after lapse of 1 – 99 seconds.

⁄

•If the time set in the cell-phone is shorter than that set in the unit, the former will be used.

•This function does not work for call waiting.

•Call Beep

You can output a beep from the speaker when a call comes in.

“ON” : Beep is heard.

“OFF” : Beep is canceled.

•Display

If this unit is not operated at least 5 seconds with “OFF” selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse.

•DISP DIM

Reduces the display Illumination brightness. AUTO: Dims the illumination in conjunction with

the Light switch of the vehicle. MNAL1: Dims the illumination constantly. MNAL2: Dims the illumination darker than MNA1. OFF: Does not dim the illumination.

•DISP N/P

Switches the display between positive or negative. In addition, you can reverse it in conjunction with the interior light.

POSI1 : Displays the text in the positive.

POSI2 : When the interior light is off, the text is displayed in the positive; when the interior light is on, the text is displayed in the negative.

NEGA1 : Displays the text in the negative.

NEGA2 : When the interior light is off, the text is displayed in the negative; when the interior light is on, the text is displayed in the positive.

•BT DVC Status

You can display the connection status, signal strength, and battery level.

: Battery level of cell-phone.

Full Nearly dead

: Signal strength of cell-phone.

Maximum Minimum

⁄

•Icons are not displayed if information cannot be obtained from the cell-phone.

•Since the number of steps for signal and battery level may differ on this device compared to your phone you could experience some inconsistancies.

•Receive Mode

Sets the receive mode of the HD Radio.

Auto: Automatically tunes to analog broadcast

when there is no digital broadcast. Digital: Digital broadcasts only.

Analog: Analog broadcasts only.

•Seek Mode

Select a tuning mode of the HD Radio.

Tuning mode

 

Display

 

Operation

Auto seek

 

“Auto1”

 

Automatic search for a station.

Preset station seek

 

“Auto2”

 

Search in order of the stations in the

 

 

 

 

Preset memory.

Manual

 

“Manual”

 

Normal manual tuning control.

•SP Select

You can specify the voice output speakers.

“All” : Outputs voice from the left and right speakers.

“Right” : Outputs voice from the right speaker.

“Left” : Outputs voice from the left speaker.

⁄

•Select the speaker which is further from the microphone in order to prevent howling or echoes.

•Supreme

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz).

Supplementing is optimized by compression format (AAC, MP3, and WMA) and processed according to bit rate.

The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

English 31