Setup Menu
EXT SW Setup
Setting up power specification of the external device for which the power is controlled from this unit.
1Display the EXT SW SETUP screen
Touch [Ext SW SETUP] in the SETUP Menu (page 58).
2Perform EXT SW Setup
Setting EXT SW Control 1 (EXT SW1)
1
2
3
4
1Sets the name of the external device. See <Character Entry> (page 48) for information on how to enter the name.
2Sets the power signal output mode. (
EXT SW1: Pulse, EXT SW2: Level, EXT SW3: Pulse, EXT SW4: Pulse)
Pulse: Generates a single power signal pulse.
Level: Continues output of high power signal.
Sets to turn output on/off each time the button on the EXT SW Control screen is pressed.
3Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set.
4Returns to the original screen.
Setting EXT SW Control 2 (EXT SW2)
1
2
3
4
The setup method is the same as "EXT SW1".
Setting EXT SW Control 3 (EXT SW3)
1
2
3
4
The setup method is the same as "EXT SW1".
Setting EXT SW Control 4 (EXT SW4)
1
2
3
4
The setup method is the same as "EXT SW1".
72