Installation

Installation for Remote control sensor

1Wipe off the installation location with a cleaning cloth.

2Secure the Remote control sensor (Accessory 8) in the specified place with the double- sided adhesive tape.

Double-sided adhesive tape

•Install the Remote control sensor on a flat surface. If it is installed on a curved surface, the tape adhesion may weaken and the controller may come off.

•Do not install the Remote control sensor in places (such as on the dashboard) where it is exposed to direct sunlight and the temperature becomes high. Otherwise, the Remote control sensor will become deformed and unusable.

•Install the Remote control sensor in places that do not obstruct driving. Install the Remote control sensor temporarily and verify that the handle, shift knob, and side brake can be operated smoothly.

Installation for A/V controller Unit

1Remove the cover using the Hexagon Wrench (Accessory@).

Hexagon Wrench (Accessory@)

2Use Tapping screws (Accessory7) to fix A/V controller Unit onto an audio board or another.

Tapping screw (ø4 × 16 mm) (Accessory 7)

3Put the cover back on.

English 89