Kenwood KRF-V5020, KRF-V6020, KRF-V7020 sW ) dB, VIDEO1, Convenient functions, VIDEO1, VIDEO1, INPUT -6 STEREO MONITOR, Cch, Sch, BASS, TREB, SOUND, SOUND, SOUND, INPUT, VOLUME, DISPLAY, RC-R0508

Convenient functions

24

DISPLAY

MULTI CONTROL

SOUND
VOLUME	MULTI CONTROL
TUNING/SKIP	SOUND
SUBWOOFER
SOUND
RC-R0508	RC-R0710

	Adjusting the sound
		You can make further adjustments to the sound while listening to
Operations		playback in the surround mode.
			Note that some items are not displayed in certain modes.
		1 Press the SOUND key to select the item you want to adjust.
			Each press switches the selection as listed below.
			BASS (low frequency range sound quality adjustment)	%
			TREB (high frequency range sound quality adjustment)	%
			Cch (center speaker level adjustment)
			Sch (surround speaker level adjustment)
			SW (subwoofer level adjustment)
			INPUT (input level adjustment)

•The adjustment item for input level is displayed only when the monitor function is activated.

2Use the MULTI CONTROL (TUNING/SKIP) to adjust the setting as desired.

•The adjustment item is displayed for approximately 8 seconds.

•If you use the remote control (RC-R0508) to perform the above setting, press the VIDEO key at this point to turn off the remote control’s own adjustment mode. In this case, the input source is not switched.

Input level adjustment (when using the monitor function)

If the input level while using the monitor function is too high, adjust the input level as described below.

1 Turn on the monitor function. ^

2Press the SOUND key several times until the “INPUT” indication appears.

3Use the MULTI CONTROL (TUNING/SKIP) to adjust the input level.

SP A B	L	R	INPUT-6 STEREO MONITOR
		SW

•The adjustment mode is displayed for approximately 8 seconds.

•The input level may be adjusted to any one of two settings: 0 and - 6. (The initial setting is 0.)

4Press the SOUND key to return to the input indication.

Ambience effects

KRF-V7020/V6020/V5020 (En/T)

SUBWOOFER adjustment (RC-R0508 only)

It is easy to adjust the volume of the subwoofer using the remote control (RC-R0508).

1Press the SUBWOOFER key so that “SW” is displayed.

SP A B	L C R	sW )dB	AUTO SOUND DIGITAL
	SW		PRO LOGIC
	LS S RS

2Use the VOLUME key to adjust the volume.

• The adjustable range is -10 dB to +10 dB.

Display dimmer adjustment

The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music.

Each time you hold down the DISPLAY key for more than two seconds, the display brightness changes among the three available settings. Select the brightness level you find most pleas- ing.

SP A B	L C R	VIDEO1	PRO LOGIC
	SW
	S
SP A B	L C R	VIDEO1	PRO LOGIC
	SW
	S
SP A B	L C R	VIDEO1	PRO LOGIC
	SW
	S