Kenwood KRF-V5020, KRF-V6020, KRF-V7020 Connecting the speakers, Powered, Powered, PRE OUT, PRE OUT, 2 Loosen, 3 Insert, 4 Secure, Surround, Speakers, SPEAKERS, KRF-V5020, subwoofer, Subwoofer

Connecting the speakers

1 Strip coating. 2 Loosen.

3 Insert. 4 Secure.

Front Speakers A

Setting up the system

KRF-V7020/V6020/V5020 (En/T)

11

1 Strip coating. 2 Push lever.

3 Insert cord. 4 Return lever.

Preparations

•Never short circuit the + and – speaker cords.

•If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly.

Right Left

Center Speaker

A

+ +

The KRF-V5020 is equipped with one-touch speaker terminals.

They are arranged in the same manner as the speaker terminals of the KRF-V7020 /KRF-V6020. Refer to the instructions on making connections to the KRF-V7020/KRF- V6020 when making connections to the KRF- V5020.

R L C

Speaker impedance

After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver.

PRE OUT connections

This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown in the example below.

			+
-		-	-
R	L	C
FRONT SPEAKERS CENTER SPEAKER			FRONT CENTER
			SPEAKERS SPEAKER
KRF-V7020, KRF-V6020			KRF-V5020

CENTER		FRONT SPEAKERS
	L	R			L
		+	-	B -	+
	R
SUB	SURROUND
WOOFER
PRE OUT
	Use the FRONT	+ R	-	-	L +
		SURROUND SPEAKERS
	SPEAKERS B
	terminals if you
	want to connect a
	second front
	speaker system.
	(KRF-V5020 is not
	equipped with
Powered	SPEAKERS B
	terminal.)	Right			Left
subwoofer		Surround Speakers
		(Be sure to connect both
		surround		speakers)

CENTER

L

Power amplifier	Surround
R	Speakers
SUB
WOOFER SURROUND
PRE OUT
	Powered
	Subwoofer
	Center Speaker

Power amplifier

•Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.

•To use the PRE OUT jacks, press the SPEAKERS A key to the on position (the SPEAKERS key in the case of the KRF-V5020).