SETUP
MULTI CONTROL

Setting up the system

Preparingtheremotecontrol(RC-R0710)

Loading the batteries

1 Remove the cover.

2 Insert the batteries.

3Close the cover.

•Insert two AA-size (R6) batteries as indicated by the polarity mark- ings.

Operation

When the STANDBY indicator is lit, the power turns ON when you press the POWER key on the remote control. When the power comes ON, press the key you want to operate.

Operating range

 

(Approx.)

Remote sensor

6 m

30˚ 30˚

Model: RC-R0710

Infrared ray system

•When pressing more than one remote control key successively, press the keys securely by leaving an interval of 1 second or more between keys.

Notes

1.The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks.

2.When the remote-controllable distance gets shorter than before, replace both batteries with new ones.

3.Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction.

In such a case, change the location of the system installation to prevent malfunction.

Preparing for surround sound

KRF-V7020/V6020/V5020 (En/T)

Speakersettings

13

To enable you to obtain optimum enjoyment from the receiver’s listening modes, make sure to complete the speaker settings as described below.

Preparations

VIDEO

MULTI CONTROL

TUNING/SKIP SETUP

SETUP

RC-R0508

RC-R0710

1Turn on the receiver.

$

2Select a speaker system.1 Press the SETUP key to make the subwoofer setting indica- tion (SUBW) appear.

SP A

L

R

sUBWYEsSTEREO

 

 

SW

 

2Use the MULTI CONTROL (TUNING/SKIP) to select the ap- propriate subwoofer setting.

1 SUBW YES: A subwoofer is connected to the receiver. 2 SUBW NO: No subwoofer is connected to the receiver.

3Press the SETUP key to accept the setting.

• The center speaker setting indication (CNTR) appears.

SP A

L

R

CNTRNMLSTEREO

 

 

SW

 

4Use the MULTI CONTROL (TUNING/SKIP) to select the ap- propriate center speaker setting.

1 CNTR NML (normal): An average size center speaker is

connected to the receiver.

2CNTR LRG (large): A large center speaker is connected to the receiver.

3 CNTR NO:No center speaker is connected to the receiver.

5Press the SETUP key to accept the setting.

• The surround speaker setting indication (SURR) appears.

6Use the MULTI CONTROL (TUNING/SKIP) to select the ap- propriate surround speaker setting.

1 SURR YES: Surround speakers are connected to the re-

ceiver.

2 SURR NO: No surround speakers are connected to the receiver.

7Press the SETUP key to accept the setting.

•The receiver enters the speaker volume level adjustment mode.

•In steps 3 and 4, indications appear only for the selected channels of the speakers that require adjusting.

Continued to next page