Kenwood KSC-WD250T Examples of Connections, Caution, Caution, Unused terminal, ■General connection, ■Connection to center unit with non-fader(subwoofer control)

Examples of Connections

Caution: ––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Under any circumstances, never apply inputs to the terminals Aand B simultaneously.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

■General connection

	• If there is no power control	CENTER UNIT
	terminal in the center unit,	CENTER UNIT
	terminal in the center unit,
	connect the blue/white wire to
	the accessory line (ignition key
	switch ACC position line).

Purple

Purple / Black

Green

Green / Black

Car fuse box

Ignition key switch

Car fuse box (Main fuse)

To the power control terminal

Blue / white

Fuse 5A × 2

Yellow

Black

REAR REAR

SP. L SP. R

INPUT INPUT

10-pin connector cord

•If buzzing noise is heard from the speakers when the engine is running, attach a line noise filter (sold separately) to the power lead.

Battery

Caution

•Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of the vehicle. Turning the power ON without connecting this terminal is linked to damage of the stereo system. Be sure to connect it.

Also, painted metal panels etc., are not grounded and will not function correctly. Be careful.

■Connection to center unit with non-fader (subwoofer control)

• If there is no power control	CENTER UNIT
terminal in the center unit,
terminal in the center unit,
connect the blue/white wire to		SUBWOOFER OUT
the accessory line (ignition key		SUBWOOFER OUT
switch ACC position line).