Accessories/ Installation Procedure
Accessories |
| Installation Procedure |
1
..........1
2
..........1
1.To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery.
2.Install the FM/AM antenna and connect the antenna wire to the HD Radio tuner.
3.Connect the HD Radio tuner and the control unit using the provided connection wire.
4.Make the proper input and output wire connections for each unit.
5.Install the unit in your car.
6.Reconnect the - terminal of the battery.
7.Press the reset button on the control unit.
3
¤
..........2 | • | Mounting and wiring this product requires skills and |
|
| experience. For safety’s sake, leave the mounting and wiring |
|
| work to professionals. |
| • | Do not install the unit in a spot exposed to direct sunlight |
|
| or excessive heat or humidity. Also avoid places with too |
|
| much dust or the possibility of water splashing. |
| • | Do not use your own screws. Use only the screws provided. |
|
| If you use the wrong screws, you could damage the unit. |
| • | After the unit is installed, check whether the brake lamps, |
|
| blinkers, wipers, etc. on the car are working properly. |