Receive Mode

Sets the receive mode.

1Select menu mode using the control unit. Select the menu item.

Select the "Receive Mode"/ "HDR mode" display.

2Open Receive mode

Press the setting button of the menu items in the control unit for at least 1 second.

3Set the Receive mode

Switching the setting of menu items.

Each time the button is pressed the Receive mode switches as shown below.

Receive mode

Display

Operation

Auto mode

"Auto"

Automatically tunes to analog

 

 

broadcast when there is no digital

 

 

broadcast.

Digital

"Digital"

Digital broadcasts only.

Analog

"Analog"

Analog broadcasts only.

4Exit Receive mode

Press the [MENU] button.

5Exit Menu mode

Preset Memory

Putting the frequency and channel in the memory.

1Select the band

Press the [FM] or [AM] button.

2Select the frequency to put in the memory Press the [4] or [¢] button.

3Put the frequency and channel in the memory Press the desired [1] — [6] button for at least 2 seconds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory on each [1] — [6] button.

Preset Tuning

Calling up the frequency and channel in the memory.

1Select the band

Press the [FM] or [AM] button.

2Call up the frequency and channel Press the desired [1] — [6] button.

⁄

•"Linking" will be displayed for few seconds until it is received.

•If the Sub channel is not available, the main channel will be received.

•When <Receive Mode> (page En-5) is set to Digital or Analog, it cannot be received if the setting is differed form the preset.

English En-5