Setting up your Kenwood KVS Speakers
Introduction
Your Kenwood KVS speakers were designed to meet the demands of today’s
Your new speakers:
•Deliver wide dynamic range and powerful bass response
•Feature
•Are
•Were designed, engineered, and assembled in the USA.
Installing the speakers isn’t difficult, but please read and follow all of the instructions in this manual to get maximum performance from your new speakers. If you’re also connecting other equipment, such as a receiver, power amplifier, or
Unpacking
Unpack your new speakers carefully and examine them for shipping damage. If they are damaged or fail to operate, notify your dealer imme- diately. If your speakers were shipped to you directly, notify the shipping company without delay. Only the person or company who originally received the unit can file a claim against the carrier for shipping damage. Keep the original carton and packing materials in case you need to transport or ship your speakers.
About speaker wire
We ask you to buy the wire sepa- rately, since we don’t know how much wire you will need. We suggest that you buy wire that is at least
Before you run out to buy speaker wire, read the section on ‘Placing the speakers’ on page 3. You’ll need to know where your speakers will go before you buy the speaker wire.
For your records
Record the serial number (found on the back of the unit) on the warranty card, and in the space below. If you need to call your dealer for information or service, you’ll need the model and serial numbers. And be sure to save your original receipt.
Model
KVS-
Serial Number
