Kenwood KVS-50 warranty Placing the speakers, KVS-60 Surround Speakers

Placing the speakers

Important

Please wait until you’ve connected all of the cables before plugging the receiver or amplifier into the AC wall outlet and turning it on.

KVS-50 Center Speaker We designed the KVS-50 Center Speaker with both a flat side with an adjustable leg, and an angled side. You can place the speaker on either side (following the instructions below).

•Place the speaker directly above or below the middle of the TV screen (the speaker is magneti- cally shielded, so you don’t have to worry about picture discol- oration).

•Place the speaker as close as possible (within 2 feet) to the same height as the left and right front speakers.

•If you place the speaker on the floor, place it on its angled side, aiming it up toward the listeners at seated ear level. In this case, you’ll probably want to reverse the speaker grille so that the lettering is right side up.

•If you place the speaker on top of the TV, place it on its flat side, and use the adjustable leg on the back to aim it down toward the listeners at seated ear level.

KVS-60 Surround Speakers

•Mount the speakers on the wall using picture hangers (40 lb test), or place them on shelves. (Attach the speaker wire first; see the instruction below).

•Place the speakers directly to the sides of the listening position, with the large grille covers point- ing at the listeners.

•If the listening area has more than 1 row of seats, place the speakers in the middle of the listening area.

•Place the speakers at least 2 feet above the listener’s heads, with the back of the cabinet flush against the wall.

•Place both speakers so that the directional arrows on the back of the cabinet point toward the TV. You’ll need to place one speaker upside-down to do this. (There is mounting hardware on both ends of the speaker). This will not affect its sound. You may want to reverse its grille so that the lettering is right side up.

3.