Setting up your Kenwood KVS Speakers
KVS-50 Center Speaker
KVS-60 Surround Speakers
Introduction
Your Kenwood KVS speakers were designed to meet the demands of today’s
Your new speakers:
•Deliver wide dynamic range
•Sonically match other speakers in the KVS series
•Feature
•Were designed, engineered, and assembled in the USA.
Installing the speakers isn’t difficult, but please read and follow all of the instructions in this manual to get maximum performance from your new speakers. And be sure to read the manual for the receiver, power amplifier, or
Unpacking
Unpack your new speakers carefully and examine them for shipping damage. If they are damaged or fail to operate, notify your dealer imme- diately. If your speakers were shipped to you directly, notify the shipping company without delay.
Only the person or company who originally received the unit can file a claim against the carrier for shipping damage. Keep the original carton and packing materials in case you need to transport or ship your speakers.
In this box
This box should contain either:
•
•
If you bought the
About speaker wire
We ask you to buy the wire sepa- rately, since we don’t know how much wire you will need. We suggest that you buy wire that is at least
Before you run out to buy speaker wire, read the ‘Placing the speakers’ section. You’ll need to know where your speakers will go to determine how much wire to buy.
For your records
Record the serial number (it’s on the back of the speaker) on the warranty card, and in the space below. If you need to call your dealer for information or service, you’ll need these numbers. And be sure to save your original receipt.
Model
Serial Number
Model
Serial Numbers
