Kenwood KVT-817DVD Zone Control, Displaying the Zone Control screen

Zone Control

You can set the front and rear audio source.

Displaying the Zone Control screen

Zone Control

Zone Control screen

								Zone
		MENU									5
1				4				Rear Vol. 15						1
					6								6
								Dual Zone
		2
							TV				DVD
									5
	3
											Rear
						7	Front					7
1														1
		8	Area		Reverse
										Zone Control

Sound Effects Menu

1Adjusts the volume.

2Returns to the Control screen of the previous source.

3Calls the Setup Menu. (page 62)

4Calls the Sound Effects Menu.

5Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. When turned On, Front , Rear and Rear volume are shown.

6Adjusts the volume of the rear channel.

(This button appears when the Zone function is On.)

7Sets the front and rear audio source separately. (This button appears when the Zone function is On.)

•When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.

However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source.

8Switches the front and rear audio sources.

(This button appears when the Zone function is On.)

Use "Reverse" to change over the front and rear audio sources.

•There are following limitations when zone function is set to "On".

-There is no output from the subwoofer or center.

-<Audio Setup> (page 64), <Equalizer> (page 92), <Surround Control> (page94), <SRS WOW> (page 96) <Position> (page98) are not available.

100 English