Before Use
Setup Menu
Crossover Network Setup
You can manually set a crossover frequency of speakers.
| X'Over | (Page 64 p) |
|
X'Over | 0dB |
|
|
LPF |
|
|
|
Subwoofer | 100Hz | 1kHz | |
Frequency |
| 4 |
|
|
|
| |
1 | 80 Hz | 1 Phase | Normal |
Slope |
|
|
|
2 | 12dB/Oct | 2 |
|
|
| 3 |
|
Return
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
4 Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set).
The phase is reversed 180 degrees when set to "Reverse".
•When you select a speaker type on the Speaker Setup screen, the crossover frequency setup is cleared.
•During crossover setup, the speaker type is set to "User" on the Speaker Set Up screen.
English 69