Kenwood LZ-651W 2 3, 4 5

English 5

1Press button.

2Select "SETUP", and press button.

3Press or button to select the adjusting item.

"NAV":Setup input and switch method of the navigation

picture.

Item Setting

"RGB"* When Kenwood navigation system is connected

by the dedicated cable.

"AV-IN" When connected to AV-IN terminal be composite

signal cable.

"OFF" It doesn’t switch the navigation picture.

*Default setting

If you set to "OFF" while the audio source is set to "NAV",

the audio source would switch to "NORMAL".

"AV-IN":Setup switch method of the picture input to AV-

IN terminal.

Item Setting

"VD"* Switched by the operation of the video source.

"CAM" Switched automatically when video signal is

input to AV-IN terminal.

"OFF" It doesn’t switch the picture input to AV-IN

terminal.

*Default setting

You cannot set "AV-IN" when "NAV" is set to "AV-IN".

If you set to "OFF" while the audio source is set to "AV-IN",

the audio source would switch to "NORMAL".

"BEEP":Setup the beep sound ON/OFF.

Item Setting

"ON" Beep is heard.

"OFF"* Beep is canceled.

*Default setting

4Press or button to select each item.

5Select "RETURN" and press to end the Menu

mode.

Also, the monitor exits from Menu mode by no opeation

for 10 seconds.

VOICE

ENTER

VOICE

ENTER

LZ-651W_ENG r2 03.7.25 9:50 AM Page 5