English 3
LZ-651W Basic Operation1Mode Setting switch
Selects the target device to control.
MON:Monitor control mode
NAVI: Navigation system control mode
AUD: Kenwood car audio system control
mode
2Volume Control button
3Power button
4Cursor button
Selects the item when the menu screen is
displayed.
5Enter button
Performs selected item when the menu
screen is displayed.
6Menu Display button
Displays the menu screen. (page 4)
7Video Source Select button
Each time the button is pressed the
monitor’s picture switches as the navigation
picture or the video picture set to "AV-IN".
8Audio Source Select button
Each time the button is pressed the audio
source switches as follows:
When the voice guidance event for the
navigation system takes place, the audio
source switches temporarily to the
sound used by the navigation system
even with the sound through the AV-IN
being output.
9Screen Mode Select button
Each time the button is pressed the screen
mode switches as follows.
[FULL]
[ZOOM]
[JUST]
[CINEMA]
[NORMAL]
NORMAL
NAV
AV-IN
OFF
Sound of monitoring picture
selected by [Video Source
Select] button.
Sound of navigation system.
Sound of input video picture
from AV-IN.
No sound.
Set Mode Setting switch to "MON"
position while operating this LCD monitor.
Refer to the instruction manual for the
operation of the navigation system.
Display the setup screen for 5 seconds as
follows:
• Screen mode
• Video source
• Audio source
• Volume
+
AV OUT
CANCEL
MENU
DEFABC.,?-&
MNOJKLGHI
WXYZTUVPQRS
BS
SBF
SPACE
POS
ROUTE
AV OUT
ZOOM
PWR SRC
MENU
DIRECT ATT NAV/
VIDEO
PWR SRC
MENU
DIRECT ATT NAV/
VIDEO
CANCEL
MENU
AUDIO
SUBTITLE
CLEARANGLE
POS
ROUTE
MON
NAVI
AUD
MON
NAVI
AUD
BAND DISC
M/S
BAND DISC
M/S
OUT
IN
ZOOM
OUT
IN
SC2
SC1
VOICE
OPEN
ENTER MODE