13
Installation for the Video Box UnitConnecting the Power2
AV INPUT AV OUTPUT
1
AV INPUT
PRK SW
FM-TX
–
+
+12V
■Securing to audio board ■Securing to pile carpet
Accessory 5
(Ø4 x 16 mm)
Accessory 6
Please do not install the unit near the dashboard, the rear tray, or other important components. Doing so could
lead to injury or accident should the unit come off due to a shock and strike a person or an important component.
Tapping screws(Accessory 5) should be used for mounting. (Attachment with velcro strips, although easy, can
come off with a shock.)
2CAUTION
Accessory 8
Accessory 7
Accessory 2
Accessory 1
Ignition wire (Red) ª12V
Parking sensor wire (Green)
Connect to the vehicle's parking brake
detection switch harness using the
supplied relay connector.
For the sake of safety, be sure to
connect the parking sensor.
2CAUTION
Ignition key switch
Car fuse box
(Main fuse)
ACC
Ground wire (Black) ·(To car chassis)
Battery
Monitor Unit
Video Box Unit
Peel the protective strips off of the velcro
strips, attach them to the bottom of the
hideaway unit, and secure to the pile carpet.
Fuse (5A)LZ_800W_English_ver4 02.12.16 1:17 PM Page 13