Basic function

Demonstration mode

The system is equipped with a demonstration function (only display). When the power cable is plugged in andbutton is pressed to turn the system on for the first time, the demonstration automatically starts. The demonstration consists of sequential change of display and indicators showing the operations, but the audio itself does not change. The demonstration function can be cancelled as follows.

To deactivate the demonstration

Press and hold (demo) button on the unit for more than 1 second during demonstration.

To activate the demonstration

After turning the power on, press (demo) button on the unit for more than 1 second.

⁄

•The demonstration operates automatically when; a power has failed and then recovered, or the plug of the power cable has been pulled out while the power was on and then plugged back in.

Switching the system on
Press , CD/USB (CD/USB), TUNER band (TUNER band) or TAPE (TAPE) button.

The standby LED will go out.

The system will switch to the last selected source or the selected source.

Switching the system to standby mode
Pressbutton.

The clock is displayed.

Volume control

Press VOLUME UP (volume %) button to increase, or press VOLUME DOWN (volume fi) to decrease the volume level.

“VOL XX” is displayed. “VOL XX” denotes the volume level.

To switch off the volume temporarily
Press MUTE button.

Playback continues without sound, and the icon “MUTE” appears on the display.

⁄

•To restore the volume, press MUTE button again or adjust the volume.

Sound control

The sound control system feature enables you to enjoy special sound effects; preset equalizer settings and bass enhancement, providing the best music reproduction.

To switch on preset equalizer settings

Press EQ (EQ/X-bass) button to select the desired sound effect: POP, CLASSIC, ROCK, JAZZ or FLAT (off).

To switch on the bass enhancement

Press and hold X.BASS (EQ/X-bass) button until the icon “X-BASS” appears on the display.

⁄

•To switch off X-BASS, press and hold X.BASS (EQ/X-bass) button until the icon “X-BASS” disappears.

•EQ and X-BASS functions are not applied to the recording sound.

Headphones

To listen to your stereo with headphones (not included), use the 3.5 mm phones jack on the top of the unit.

¤

•Excessive sound pressure from earphones and headphones can cause hearing loss.

10EN