The icon “TIMER” flashes and the source display appears.
8 Press P.MODE (p.mode) button.
9 Press SEARCH/TUNING 4 or ¢ (4 or ¢ search +/–) button to select the desired source and press P.MODE (p.mode) button to store the setting.
The source switches as follows :
“CD” = “USB” = “TUNER” = “TAPE” = “REC TU” (recording tuner)
continued to next page EN19
Press TIMER SET (timer set) button.
7
The icon “TIMER OFF” starts flashing.
6 Repeat the step 3 and 4 to set the time to stop the timer (off time).
Press TIMER SET (timer set) button.
5
Set the time to start playback.
Press SEARCH/TUNING 4 or ¢ (4 or ¢ search +/–) button to set timer start hours and press P.MODE (p.mode) button to store the setting. Repeat the same procedure to set the minutes.
4
Press P.MODE (p.mode) button. The hour indication starts flashing.
3
Timer setting
The system can switch on to CD, USB, TUNER or TAPE mode automatically at a preset time, serving as an alarm to wake you up.
The timer recording of radio programs onto a cassette tape is also possible.
Important!
Before setting the timer, ensure that the clock is set correctly.
When setting the timer (playback or recording) for TUNER, be sure to select the station you wish to tune in beforehand.
1 Turn the system on.
2 Press TIMER SET (timer set) button twice to enter timer setting mode.
The icon “TIMER ON” starts flashing on the display.
Clock/timer operation
View clock
The clock (if it is set) is shown in standby mode.
To view the clock in any source mode, press TIMER SET (timer set) button. The clock will be displayed.
If the clock has not been set, “0:00” starts flashing.
Clock setting
Before carrying out the clock setting, ensure that the system is in standby mode.
1Press P.MODE (p.mode) button to enter the hour setting mode.
The hour indication will start flashing.
2Press SEARCH/TUNING 4 or ¢ (4 or ¢ search +/–) button to set the hours.
3Press P.MODE (p.mode) button to enter the minute setting mode.
The minute indication starts flashing.
4Press SEARCH/TUNING 4 or ¢ (4 or ¢ search +/–) button to set the minutes.
5Press P.MODE (p.mode) button to store the setting.
⁄
•The clock setting will be erased when the power cord is disconnected or a power failure occurred.
•The clock can be set in either 12 or