Using the CD/MP3-CD/WMA-CD/USB device

Preparation

Loading a disc
1Press CD/USB (CD/USB) button to select CD mode.
2Press the area marked [push open] on the top cover to open the CD door.
3Place a disc into the tray with the label facing up.

Push surrounding of the disc center hole until it is locked to the center part of the tray.

4Close the CD door.

For a normal CD, the total playtime and total number of tracks will appear in the display. For an MP3-CD and WMA-CD, the total album number and total file number will appear on the display.

⁄

•To remove the disc, press the area marked [push open], grasp the disc by its edges, and carefully pull it out.

Inserting a USB device
1Press CD/USB (CD/USB) button to select USB mode.
2Insert a USB device to the USB connector on the front panel.

Playback automatically starts.

⁄

•To ensure good system performance; wait until the unit completely reads the disc/USB device before proceeding.

•If the disc compartment is not loaded with a disc, “NO DISC” is displayed. If the disc is unreadable, “NO PLAY” is displayed.

•If no USB device is inserted, “NO USB” is displayed. If the USB device is unreadable, “NO DATA” is displayed.

•For audio files, reading time may exceed 10 seconds due to the large number of songs compiled into one disc/USB device.

•For audio files, “A” on the display represents ALBUM.

•For audio files, the total album number on the display indicates the number of all the albums recorded in the disc/ USB device.

•The icon “MP3” appears only when an MP3-file is played. It does not appear when playing a WMA-file.

Playing a disc/USB device

Press PLAY/PAUSE 6 (6) button to start playback.

The track/file number and elapsed playing time of the current track/file appear on the display.

⁄

•To interrupt playback, press PLAY/PAUSE 6 (6) button. The playing time starts flashing.

To resume playback, press PLAY/PAUSE 6 (6) button again.

•To stop playback, press STOP 7 (7) button.

Selecting a desired track/passage

To select a desired track

Press SEARCH/TUNING 4 or ¢ (4 or ¢ search +/–) button repeatedly until the desired track appears on the display.

⁄

•If playback is stopped, press PLAY/PAUSE 6 (6) button to start playback.

•The digit buttons, 0–9 on the remote control unit can also be used to select a track.

Press the digit buttons as shown below: To select track 2 : 2 and ENTER

To select track 23 : 2, 3 and ENTER

To select track 120 (Audio file only) : 1, 2 and 0

To search for a particular passage during playback
Press and hold SEARCH/TUNING 4 or ¢ (4 or
¢search +/–) button and released it when the desired passage is located.

EN11