Kenwood MG700 safety, before using your Kenwood appliance, before plugging in, important UK only

English

Use the meat grinder to process meat, poultry and fish. Use the inclusive attachments to shape sausages and kebbe.

before using your Kenwood appliance

●Read these instructions carefully and retain for future reference.

●Remove all packaging and any labels.

safety

●Always ensure bones and rind etc are removed from the meat before mincing.

●When mincing nuts only feed a few down at a time and allow the scroll to pick them up before adding any more.

●Always unplug:

●before fitting or removing parts

●after use

●before cleaning.

●Always use the pusher supplied. Never put your fingers or utensils in the feed tube.

●Warning - the cutting blade is sharp, handle with care both in use and cleaning.

●Ensure the attachment is secured in position before switching on.

●To avoid electric shocks, never let the power unit, cord or plug get wet.

●Never use a damaged appliance. Get it checked or repaired: see ‘Service’.

●Never use an unauthorised attachment.

●Never let the cord hang down where a child could grab it.

●This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

●Children should be supervised to ensure that they do not play with the appliance.

●Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

before plugging in

●Make sure your electricity supply is the same as the one shown on the underside of your machine.

important (UK) only

●The wires in the cord are coloured as follows:

Blue = Neutral Brown = Live.

●The appliance must be protected by a 13A approved (BS1362) fuse.

Note:

●For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

●If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

●This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.

before using for the first time

1Wash the parts see ‘care and cleaning’

2Push excess cord into the cord stowage compartment at the back of the power unit.

4