mincer

power unit locking lever attachment outlet on/off speed control spanner

ring nut

mincer screens: fine, medium, coarse

cutter scroll mincer body feed tube tray pusher dish/cover

storage unit for kebbe and sausage adaptors

to assemble

1Fit the scroll inside the mincer body.

2Fit the cutter – cutting side outermost ￿. Ensure it’s seated

properly – otherwise you could damage your mincer.

3Fit a mincer screen ￿. Put the notch over the pin.

●Use the fine screen for raw meat; fish; small nuts; or cooked meat for shepherd’s pie or meat loaves.

●Use the medium and coarse screens for raw meat; fish and nuts.

4 Loosely fit the ring nut.

to use the mincer

1With the mincer attachment in the position shown ￿, locate in the

outlet. Rotate the mincer body so that the feed tube is upright.

2Tighten the ring nut firmly by hand. ● If you experience poor results when mincing meat, switch off and unplug

the machine. Dismantle and clean the attachment, then re-assemble

the attachment and refit to the

power unit. Tighten the ring nut. using the spanner provided ￿

3Fit the tray. Put the dish/cover under the mincer to catch the food.

4Thaw frozen food thoroughly before mincing. Cut meat into 2.5cm (1”) -wide strips.

5Switch to speed 2. Using the pusher, gently push the food down the feed tube, one piece at a time. Don’t push hard – you could damage your mincer.

Note:

Speed 1 is for extruding sausages, kebbe and for use with the optional attachments.

●If the machine stalls or overheats during use, it will stop mincing and emit a quiet humming noise. In the case of a stall, switch the machine off, then turn the control to R (reverse) for a few seconds to release the clogged food. Switch off and unplug the machine and remove any clogged material. However, if the machine overheats, switch the machine off and allow it to cool down for 1 hour before continuing the mincing operation.

●When selecting reverse, always wait until the machine stops operating

before turning the speed control to the reverse (R) position.

6Switch off and unplug after use.

7Loosen the ring nut. If necessay use the spanner provided.

8Move the locking lever towards the back of the unit, then rotate the feed tube towards the front of the machine, then pull free.

5

Page 5 Page 7
Page 6
Image 6
Kenwood MG700 manual Mincer, To assemble, To use the mincer
Page 5 Page 7

MG700 specifications

The Kenwood MG700 is an impressive stand mixer that stands out in performance and versatility, making it a must-have kitchen appliance for both amateur and professional cooks. Known for its durability and efficiency, the MG700 combines powerful technology with user-friendly features designed to enhance your culinary experience.

One of the standout characteristics of the Kenwood MG700 is its robust 1000-watt motor, which offers ample power to handle a variety of mixing tasks, from whipping egg whites to kneading heavy bread dough. This powerful motor is equipped with multiple speed settings, allowing users to select the perfect speed for their recipe — whether it requires a gentle fold or a vigorous mix. The variable speed control ensures that ingredients are mixed uniformly while helping to prevent splatter and mess.

The MG700 features a large 4.3-liter stainless steel mixing bowl that provides ample capacity for big batches of dough or batter. The bowl's sturdy construction ensures durability, while its polished finish makes it easy to clean. Additionally, the bowl is dishwasher-safe, adding convenience to the cleanup process.

Incorporating Kenwood's well-known planetary mixing action, the MG700 reaches every part of the bowl, ensuring that ingredients are thoroughly combined. This technology mimics the movement of professional-grade mixers, delivering superior results with minimal effort.

Included with the mixer are a variety of attachments designed to increase functionality. The dough hook, whisk, and K-beater are optimized for different mixing tasks, making it easy to switch between them according to your needs. For even more versatility, the MG700 is compatible with various Kenwood attachments, including food processors and blenders, transforming it into a multi-functional kitchen powerhouse.

Safety is also a priority in the design of the MG700. It features a safety lock mechanism that ensures the mixer will not operate unless the bowl and head are correctly secured in place. This ensures peace of mind while mixing.

Lightweight yet sturdy, the Kenwood MG700 mixer is designed for ease of use and storage. Its sleek and modern design not only looks good on any countertop but also makes it an appealing option for those who want a reliable mixer that complements their kitchen decor. With the Kenwood MG700, users can embark on a culinary journey equipped with a powerful, versatile, and stylish kitchen assistant. Whether you’re baking, mixing, or whipping, the MG700 is ready to help you achieve perfect results every time.
Top Page Image Contents