MOUNTING BRACKET FOR LZH-70W OVERHEAD CONSOLE

SK-70MB

INSTALLATION

MANUAL

KENWOOD USA CORPORATION

Before you begin:
WARNING

•To minimize the risk of improper installation, Kenwood recommends that the installation of this product be performed by an MECP- Certified professional installer. Improper installation may cause damage to the vehicle or injury to the driver and occupants.

•Installation must be performed according to the product installation manual. Kenwood is not responsible for damages or injuries resulting from installation not performed strictly in accordance with the procedures described in the manual.

•This product is designed only to be used with the LZH-70W overhead console.

•Use only new, unused and properly-sized fasteners to install this product. Do not use previously-installed or worn fasteners.

•No modifications to the product or mounting hardware are permitted.

•The monitor screen that attaches to this product must not be visible to the driver. Viewing by the driver while operating the vehicle will create an unsafe condition.

•This product must not obstruct the driver’s rear view when installed or used.

•It is the responsibility of the purchaser and installer to comply with all applicable laws and regulations governing the installation and use of this product.

•Kenwood disclaims all liability for any property damage or personal injury that may result from improper or unintended installation or use of this product.