35
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
STORING DTMF NUMBERS FOR AUTOMATICDIALER
To store a DTMF number with a maximum of 16 digits in
any of 10 dedicated DTMF memory channels, follow the
procedure below.
Note:
Audible DTMF tones from other transceivers near you may be
picked up by your microphone. If so, this could prevent the function from
working correctly.
1Press [F], [BAND] to enter Menu mode.
2Select Menu No. 10 (DTMFMR).
3Press [BAND].
•The display for entering a DTMF number appears.
4Use the keypad to enter the digits of the number to
be stored.
•The corresponding DTMF tones are heard.
•If you enter incorrect digits, press [LOW] to erase all
digits entered.
5Press [BAND] to complete entry.
•The display for entering a channel number appears.
6Press a single key [0] to [9] to select the desired
channel.
•The entered number is stored in the selected channel.
7Press any key other than [BAND], [LAMP], [MONI],
and [0] to [9] to exit Menu mode.
CONFIRMING STORED DTMF NUMBERS
1Press [F], [BAND] to enter Menu mode.
2Select Menu No. 10 (DTMFMR).
3Press a single key [0] to [9] to select the desired
channel.
•The number stored in the channel scrolls across the
display accompanied by DTMF tones from the speaker.
4Press any key other than [BAND], [LAMP], [MONI],
and [0] to [9] to exit Menu mode.